100% Synthetic engine oil - Ester Based "Fuel economy" engine oil specially designed for modern cars with petrol engines, designed to use oil with low friction, very low HTHS viscosity (= 2.60 mPa.s) and "Mid SAPS" reduced content of suphated ash, phosphorus (0.06 = x = 0.08%) and sulphur (= 0.5%). Catalytic converter friendly.
These oils may be unsuitable for use in some engines. Refer to the owner manual or handbook if in doubt.
Back compatibility of new API SM standard over API SL requirements and former API standards. Drain interval : according to manufacturers’ recommendations and tune to your own use. Can be mixed with synthetic or mineral oils.

-API SM lubricants provide outstanding oxidation resistance, better anti deposits protection, better engine cleanliness, anti wear protection and enhanced performance at cold temperature during all oil life span.
-0W-20 grade minimise oil hydrodynamic friction, allows fuel economy specially when oil is cold.
-Improves oil flow at start up, faster oil pressure build up, faster rev raisings and reach operating temperature faster.
-Environment friendly, those oils allow fuel consumption reduction and then minimise green house gases emissions.